Analyzing a Centrifugal Pump Design with Frozen Rotor Approximation

Brianne Costa June 25, 2018

In the 1998 song “This Kiss”, country singer Faith Hill describes the way she feels for the person she loves as “centrifugal motion”. Either Hill wants to get away from the song’s subject ASAP or she mixed up the term centrifugal with centripetal. We’ll forgive the 20-year-old song’s inaccuracies — besides, understanding the effect of centrifugal force is more important when designing components in a wide range of industries, such as centrifugal pumps for automotive applications, than in songwriting.

Ler Mais

Categorias

Thomas Forrister April 24, 2018

Wastewater often contains organic and inorganic materials, which can be nonbiodegradable and even toxic. To reuse wastewater, these contaminants are removed via physical, chemical, and biological processes. Clarifiers treat wastewater by separating the particles via sedimentation, but their performance is affected by factors such as settling, turbulence, the ratio of the particles’ outer surfaces to mass, sudden direction changes in the flow, and the velocity profile. To design clarifiers for effective wastewater treatment, engineers can turn to fluid flow simulation.

Ler Mais

Categorias

Caty Fairclough October 10, 2016

Mixers are used for different purposes in many modern industries. If you are looking for an efficient mixer design process, you need a simulation tool that enables you to mix and match different mixer elements. With the COMSOL Multiphysics® software, you can create a mixer geometry that fits your own needs. Today, we’ll discuss modeling a laminar mixing problem with a flat-bottom mixer and two turbulent mixing problems with dished-bottom mixers that utilize the k-epsilon and k-omega turbulence models.

Ler Mais

Categorias

Christopher Boucher June 8, 2016

Static mixers are well-established tools in a wide variety of engineering disciplines due to their efficiency, low cost, ease of installation, and minimal maintenance requirements. When evaluating whether a mixer can be used for a certain purpose, it is important to determine whether the resulting mixture is sufficiently uniform. In this blog post, we will discuss the setup of an app designed to quantitatively and qualitatively analyze the performance of a static mixer using the Particle Tracing Module.

Ler Mais

Ed Fontes January 26, 2016

The rotation of the impellers in a mixer or stirred reactor creates ripples on the liquid surface when the agitation is moderate. If the ripples are small in comparison to the height of the fluid in the vessel, the shape and height of the free surface can be explicitly calculated from the velocity field in a separate solution step. The latest version of the Mixer Module in COMSOL Multiphysics includes a Stationary Free Surface feature for such computationally inexpensive calculations.

Ler Mais

Categorias

Ed Fontes July 6, 2015

Since we released version 5.0 of the COMSOL Multiphysics® software, you have the ability to create simulation apps — either starting from scratch or with a demo app from the Application Library. Today, we’ll introduce you to an app that can be used for understanding and optimizing mixer design and operation for a given fluid. The exemplified app models and simulates stirred tank mixers, which are used for reactors in the fine chemical, pharmaceutical, food, and consumer products industries.

Ler Mais

Categorias

Fabrice Schlegel September 26, 2014

There are two aspects of home brewing: the culinary side and the engineering one. Many beer lovers start brewing either to improve a recipe, try to clone their favorite beer, or even simply just to see how it works. After brewing a few batches, however, it turns out that the brewing process can also be very challenging from an engineering point of view.

Ler Mais

Phil Kinnane December 6, 2013

The Mixer Module provides ready-made interfaces for describing the difficult problem of laminar and turbulent flows in rotating machinery with free liquid surfaces. COMSOL has been developing different techniques for modeling CFD, moving geometries, and free surfaces during the past few years for a number of different applications. This has now culminated in the new Mixer Module that was released with version 4.4, and it clearly showcases the improved CFD capabilities of COMSOL.

Ler Mais

Categorias