Por página:
Busca

Subsurface Flow Blog Posts

Simulating Multiphase Flow in Porous Media with a Low Permeable Lens

December 13, 2018

Modeling phase transport helps you study the multiphase flow through a porous medium (such as groundwater through soil).

Predicting Solute Transport in Groundwater Using Simulation

January 18, 2018

In order for groundwater to be useful for irrigation and drinking, we need to understand how its various solutes move through the water. The Subsurface Flow Module includes features for this.

Computing Porosity and Permeability in Porous Media with a Submodel

September 27, 2017

Porous materials have complex geometries and may therefore be difficult to model. Setting up a microscale submodel is a useful approach to find the porosity and permeability of the medium.

How to Use the Well Feature in Subsurface Flow Models

August 21, 2017

The Well feature makes it easier to set up and mesh well geometries for subsurface flow modeling. Learn how to take advantage of this feature’s settings and capabilities.

Studying the Artificial Ground Freezing Method with Simulation

May 18, 2017

Artificial ground freezing (AGF) is a valuable process in the construction industry. Researchers from China modeled groundwater flow to optimize an artificial ground freezing (AGF) process.

Predicting Deformations in a Bank Protection Structure with Simulation

April 3, 2017

To predict how a bank protection structure within the Yangtze River in China would deform under certain conditions, a group of researchers turned to geomechanical analysis.

Which Porous Media and Subsurface Flow Interface Should I Use?

February 13, 2017

We go over a comprehensive selection of porous media and subsurface flow interfaces available to you in the COMSOL® software so that you can find the right choice for your modeling objective.

Improve the Productivity and Safety of a Perforated Well with an App

November 14, 2016

When designing a perforated well to recover oil and gas, choosing the right number of perforations with the appropriate properties is key. Too many holes and you run the risk of equipment failure or injury; too few and you decrease productivity levels. One way to achieve this balance and improve the safety and productivity of the recovery operation is to model fluid flow near the wells. Let’s see how the Application Builder makes this process even more efficient.


First
Previous
1–8 of 23
EXPLORE O BLOG COMSOL