Materials Blog Posts
How to Perform Multimaterial Optimization in COMSOL Multiphysics®
Does a tuning fork sound better when made out of aluminum instead of copper or steel? In COMSOL Multiphysics®, you can perform an optimization study for multiple materials to find out.
How to Generate Randomized Inhomogeneous Material Data
Did you know there is a way to take randomized material data with specified statistical properties determined by a spectral density distribution and use it to generate and visualize results?
Efficiently Assign Materials in Your COMSOL Multiphysics® Model
To optimize your modeling processes, there are a number of built-in materials available for you to use in the COMSOL Multiphysics® software. Along with these materials are features and functionality that allow you to efficiently assign materials to geometric entities in your model. These tools help expedite the process of assigning materials, specifying material properties, and even comparing the impact of different materials on your simulation results. Here, we’ll highlight three tutorial videos that showcase how to use such tools.
Thermal Modeling of Phase-Change Materials with Hysteresis
In today’s blog post, we will introduce a procedure for thermally modeling a material with hysteresis, which means that the melting temperature is different from the solidification temperature. Such behavior can be modeled by introducing a temperature-dependent specific heat function that is different if the material has been heated or cooled past a certain point. We can implement this behavior in COMSOL Multiphysics via the Previous Solution operator and a little bit of equation-based modeling. Let’s find out how…
Tracking Material Damage with the Previous Solution Operator
When modeling a manufacturing process, such as the heating of an object, it is possible for irreversible damage to occur due to a change in temperature. This may even be a desired step in the process. With the Previous Solution operator, we can model such damage in COMSOL Multiphysics. Here, we will look at the “baking off” of a thin coating on a wafer heated by a laser.
Modeling Laser-Material Interactions in COMSOL Multiphysics
A question that we are asked all of the time is if COMSOL Multiphysics can model laser-material interactions and heating. The answer, of course, depends on exactly what type of problem you want to solve, as different modeling techniques are appropriate for different problems. Today, we will discuss various approaches for simulating the heating of materials illuminated by laser light.
Modeling Laser-Material Interactions with the Beer-Lambert Law
High-intensity lasers incident upon a material that is partially transparent will deposit power into the material itself. If the absorption of the incident light can be described by the Beer-Lambert law, it is possible to model this power deposition using the core functionality of COMSOL Multiphysics. We will demonstrate how to model the absorption of the laser light and the resultant heating for a material with temperature-dependent absorptivity.
Obtaining Material Data for Structural Mechanics from Measurements
We often get requests of the type “I would like to just enter my measured stress-strain curve directly into COMSOL Multiphysics”. In this new blog series, we will take a detailed look at how you can process and interpret material data from tests. We will also explain why it is not a good idea to just enter a simple stress-strain curve as input.
- COMSOL Now
- Today in Science