Designing CSRR-Based Sensors to Monitor Chronic Kidney Disease

Bridget Cunningham March 13, 2017

Chronic kidney disease can be effectively diagnosed, prevented, and treated through the use of noninvasive CSRR-based sensors. Researchers optimized the design of these sensors with simulation.

Ler Mais

Bridget Cunningham March 10, 2017

Pass the salt…for a clean energy solution. Salinity gradient power relies on osmosis between fresh- and saltwater to generate power, and simulation can help analyze and optimize such systems.

Ler Mais

Bridget Cunningham March 9, 2017

In order to design superconducting magnets for a particle accelerator, such as the Large Hadron Collider at CERN, researchers need to simulate and optimize their electrothermal transients.

Ler Mais

Nancy Bannach March 8, 2017

A simulation application, such as one for a thermoelectric cooler design, can be used to test a variety of parameters in order to optimize a device for a specific use.

Ler Mais

Caty Fairclough March 6, 2017

To study a utility boiler furnace, you need to account for the effects of radiation, which is difficult to solve for analytically and study experimentally. That’s where simulation comes in.

Ler Mais

Walter Frei March 2, 2017

Compute the distance between two deforming objects in the COMSOL Multiphysics® software. Here’s how…

Ler Mais

Bridget Cunningham March 1, 2017

Compare the load capacities for different types of hydrodynamic bearings and determine which is best suited for your area of study by using the Rotordynamics Module.

Ler Mais

Rémi Magnard February 28, 2017

Simulation applications can be used as utility tools to compute the properties and parameters of a component or device. In this example, the application analyzes beam section geometries.

Ler Mais

Yosuke Mizuyama February 27, 2017

In this wave optics demonstration, learn how to implement the Fourier transformation for computed solutions, using the example of an electromagnetic simulation of a Fresnel lens.

Ler Mais

Caty Fairclough February 23, 2017

To investigate a novel design for roof tiles that can keep buildings cool in hot climates, called Life HEROTILE Project, a research group from Italy turned to multiphysics simulation.

Ler Mais

Caty Fairclough February 21, 2017

Shallow water equations are an example of equation-based modeling. You can define expressions in COMSOL Multiphysics® to solve a shallow water equation for coastal erosion analyses.

Ler Mais



1 35 36 37 38 39 130