Por página:

Últimas Postagens

Which Porous Media and Subsurface Flow Interface Should I Use?

February 13, 2017

We go over a comprehensive selection of porous media and subsurface flow interfaces available to you in the COMSOL® software so that you can find the right choice for your modeling objective.

Electrochemical Impedance Spectroscopy: Experiment, Model, and App

February 9, 2017

Experience the phenomenon of electrochemical impedance spectroscopy (EIS) in 3 ways: experiment, model, and simulation application.

Efficiently Verify Electric Fields Outside Electrical Installations with Apps

February 8, 2017

Electrical installations are required to have their surrounding electric fields fall within certain levels. A simulation application can be used to verify measurements and adhere to standards.

How and When to Open Recovery Files in COMSOL Multiphysics®

February 7, 2017

If, by chance, the software shuts down before your simulation converges, just use the Open Recovery File feature to pick up where you left off and find your model’s solution.

Preventing Bubble Entrapment in Microfluidic Devices Using Simulation

February 6, 2017

Microfluidic devices are no match for bubbles. In fact, if bubbles become trapped in a microfluidic device, it could malfunction. Veryst Engineering created a CFD model to study this process.

Fat-Washing Cocktails on an Industrial Scale

February 2, 2017

Bacon-flavored vodka? Pecan-infused bourbon? The fat-washing process extracts the flavors from fat and dissolves it into alcohol, and it can even be scaled up to an industrial level.

Ensure Accurate Expansion Fan Results with a Benchmark Model

January 31, 2017

When a supersonic flow turns around a convex corner, it causes an expansion fan. You can analyze this phenomenon in COMSOL Multiphysics® with a validated benchmark.

How to Couple a Full-Wave Simulation to a Ray Tracing Simulation

January 30, 2017

Learn how to couple full-wave and ray tracing simulations in a model with a nonhomogenous domain around the antenna. Part 4 of a series on multiscale modeling in high-frequency electromagnetics.