Por página:

Blog Posts Tagged Technical Content

Curve Fitting of Solution Data in COMSOL Multiphysics®

July 27, 2021

We discuss curve fitting of continuous solution data, the concept of orthogonality, and how to fit solution data to a set of orthogonal functions for a simple and convenient postprocessing operation.

Modeling Pitting Corrosion in COMSOL Multiphysics®

July 13, 2021

When the process of generalized corrosion is allowed to continue, the initialization of a pit may occur on the metal surface, which is also referred to as the Evans drop experiment.

Designing Antireflecting Microstructures for Infrared Applications

June 29, 2021

Explore how 2 microstructure designs can improve the bulk transmittance of silicon (~70%) and cadmium zinc telluride (~79%) to more than 90% within the specific wavelength spectrum.

Voltage and Ground When Modeling Wave-Like EM Fields

June 17, 2021

We continue our discussion of voltage and ground by defining and interpreting these terms for sinusoidally time-varying electromagnetics models.

Do Voltage and Ground Exist?

June 15, 2021

Remember how the terms “voltage” and “ground” were taught in your university electrical engineering classes? Get a precise definition (in terms of modeling computational EM problems) here.

How to Compute Residence Time in Flow Models with COMSOL®

June 1, 2021

You can compute residence time in flow problems using the Particle Tracing Module. Get the details in this blog post.

What Is the Difference Between Plane Stress and Plane Strain?

May 20, 2021

We go over the formulations and constitutive models that you can use to study plane stress, plane strain, and generalized plane strain in your solid mechanics problems.

Efficient Meshing Strategies for 3D Inductive Heating Models

May 11, 2021

Interested in some efficient meshing strategies for 3D inductive heating models? In this blog post, we demonstrate how to partition a mesh based upon the element type.

1–8 of 613