COMSOL Day Northeast (Online)

May 19, 2020 8:30 AM - 4:00 PM EDT

View All COMSOL Day Locations

Join us and fellow engineers from your region online for COMSOL Day Northeast. Listen to experts in the field of simulation, engage in product demonstrations, and ask questions to COMSOL technical staff. There will be interactive Tech Cafés run in parallel with the main sessions, covering high-frequency electromagnetics, chemical and electrochemical engineering, and simulating phenomena through specialized and tailor-made apps.

View our schedule below and register for free today!

Schedule

8:50 a.m.

Please join us 10 minutes before the presentation starts to settle in and make sure that your audio and visual capabilities are working.

9:00 a.m.

To start, we will briefly discuss the format of the day and go over the logistics for using GoToMeeting.

9:05 a.m.

See how you can deploy the power of high-fidelity simulation to engineers, designers, operators, and scientists throughout your organization.

9:30 a.m.

Learn the fundamental workflow of COMSOL Multiphysics®. This introductory demonstration will show you all of the key modeling steps, including geometry creation, setting up physics, meshing, solving, and postprocessing.

10:15 a.m.
Q&A/Break
10:30 a.m.
Parallel Sessions
Acoustic-Structure Interaction

Learn about the Acoustics Module and how it can be used to model sounds waves, their propagation, and their interaction with solids at both small and large scales. Use cases include nondestructive testing, speakers, microphones, and sonar.

Tech Café: High-Frequency Electromagnetics

Antennas, waveguides, metamaterials, and filters are just some of the high-frequency and microwave devices that will be discussed in this Tech Café. COMSOL engineers will be available to take your questions and suggest modeling techniques for simulating these and other devices.

11:15 a.m.
Q&A/Break
11:30 a.m.

Why I Like COMSOL Multiphysics® as a Simulation Platform

12:00 p.m.
Break for Lunch
12:30 p.m.
Welcome Back: Some Useful Resources
12:45 p.m.
Parallel Sessions
Low-Frequency Electromagnetics

Learn about the capabilities of the AC/DC Module for modeling Maxwell's equations in the low-frequency regime. Use cases include resistive and capacitive devices, inductors and coils, as well as motors and magnets.

Tech Café: Chemical and Electrochemical Engineering

This Tech Café will cover the modeling of many of the transport and reaction kinetic processes that describe applications within chemical and electrochemical engineering. You will be able to discuss these processes with COMSOL engineers and colleagues working within these fields, and hear how best to model them using COMSOL Multiphysics®.

1:30 p.m.
Q&A/Break
1:45 p.m.

Enhancing the Product Development Lifecycle with Advanced Simulation

2:15 p.m.
Parallel Sessions
Fluid Flow and Heat Transfer

Get an overview of using the CFD Module for laminar, turbulent, non-Newtonian, and multiphase flows as well as flow in microfluidic devices. We will discuss conjugate heat transfer with the combination of heat transfer in solids and heat transfer in fluids, including thermal radiation effects. These phenomena could also be coupled with structural mechanics, chemical reactions, and particle tracing.

Tech Café: Simulation Apps

Simulation apps enable you to expand your modeling and give more control to your colleagues who require simulations for their designs and processes. You can create user-specific modeling environments that are best suited to their simulation needs while also being easy enough for them to use, even if they are not modeling experts. During this Tech Café, you can discuss how best to develop simulation apps with COMSOL engineers, who will also be answering your specific questions.

3:00 p.m.
Q&A/Break
3:15 p.m.

Get an overview of the shape and topology optimization capabilities available in the COMSOL® software for producing lightweight and more efficient designs. Shape optimization involves the free-form deformation of a CAD part by means of the mesh and geometry deformation tools in COMSOL Multiphysics® and the Optimization Module. Using just a few control variables, you can quickly come up with improved designs. Topology optimization is used to come up with entirely novel designs by allowing the material distribution within the modeling domain to vary.

COMSOL Speakers

Ajinkya Shetye
COMSOL
Ajinkya Shetye joined COMSOL in 2016 as a technical sales engineer. He received his master's degree in mechanical engineering from the University of Texas, Arlington. Ajinkya's research focus was on microfluidics, thermal management, MEMS fabrication, and interfacial phenomena.
Bjorn Sjodin
COMSOL
Bjorn Sjodin is the VP of product management at COMSOL. He has been with COMSOL since 1995 and started out as a member of the development team in Stockholm, Sweden. He joined the COMSOL office in Burlington in 2002.
Jinlan Huang
COMSOL
Jinlan Huang is an applications engineer for vibrations and acoustics and instructs acoustics and heat transfer training courses. She received her PhD from Boston University, Department of Aerospace and Mechanical Engineering, investigating acoustic wave propagation in complex-tissue environments and ultrasound-induced tissue heating and bleeding control. She joined COMSOL in 2011.
Jaymin Patel
COMSOL
Jaymin Patel is an applications engineer at COMSOL. His focus is on products related to CFD, heat transfer, and chemical engineering. He received his master's degree in chemical engineering from the Georgia Institute of Technology.
Nicholas Snaith
COMSOL
Nick Snaith joined COMSOL in 2006 and is currently a sales manager in the Burlington, MA, office. He works with customers in Tennessee, North Carolina, and New Jersey.
Phil Kinnane
COMSOL
Phil Kinnane is the VP of sales at COMSOL, Inc. He has previously worked within the Business Development, Operations, and Marketing departments. Phil has 20 years of experience with modeling and simulation for all fields of engineering. He earned his PhD in electrochemical engineering from the Royal Institute of Technology, Stockholm.
Yeswanth Rao
COMSOL
Yeswanth Rao is a senior applications engineer and has been with COMSOL since early 2008. He holds a PhD in biological engineering and a master's degree in electrical engineering. His finite element background is in MEMS, particularly piezoelectric modeling.
Jiyoun Munn
COMSOL
Jiyoun Munn is the technical product manager for the RF Module at COMSOL and a senior member of IEEE. He has 2 decades of experience in the RF industry, creating more than 150 antenna and microwave device prototypes and holding patents for antenna interrogation systems. He has an MS in electrical engineering from the University of Michigan.
Siva Sashank Tholeti
COMSOL
Siva Sashank Tholeti is an applications engineer at COMSOL. He received his PhD in aeronautics and astronautics from Purdue University. His areas of interest include CFD, plasma-enhanced aerodynamics, plasma physics, propulsion, and multiphysics problems.

Join COMSOL Day Northeast (Online)

This event has ended. Visit the event calendar to view upcoming events.

COMSOL Day Details

Location

This event will take place online

Invited Speakers

Larry Mickelson
Alcoa, Inc.

Larry Mickelson joined Alcoa in 2011 and is currently a senior staff electrochemist. He received his PhD in materials science and engineering from Arizona State University. His academic and industrial research have included both experimental and computational work in hydrogen fuel cells, Li-ion batteries, and primary aluminum production.

Michael Harman
Ximedica

Michael Harman brings over a decade of applied engineering and science academic research experience across disciplines of infectious diseases, cancer biology, device design, and biophysical modeling. He has a BS and MS in biomedical engineering from the University of Connecticut with research focused on optimization of percutaneous cardiac valve implants. He transitioned to project lead for a collaborative research initiative between the Department of Medicine and Center for Cell Analysis and Modeling at the University of Connecticut Health Center, before completing a PhD in molecular and cellular biology at the University of Arizona. He came to Ximedica after completing a dual appointment postdoctoral fellowship with the Department of Surgery at Rhode Island Hospital and School of Engineering at Brown University. ​