Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Asynchronous Machine time dependent startup, singularity error
Posted 21/07/2011, 14:00 GMT-04:00 Geometry, Mesh, Modeling Tools, Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics & Thermal Stresses Version 4.2, Version 4.2a 8 Replies
I am trying to simulate a ASM in the rotating machines physics, time dependent.
The Stator slots are coupled to the electrical circuit physics for a Voltage excitation
The rotor slots are also coupled there to define the short circuit resistants.
I am using the ODE Interface for a rotation velocity equation.
When simulating for 20ms, with a timestep of 1ms(or less), everything is fine (rotor slowly starts rotating).
But when I want to calculate for a longer time, the computation stops somewhen in the middle, saying something like:
"Repeated error test failures. May have reached a singularity.
Last time step is not converged."
I choose the mesh as extremely fine and tried a step size of 55us.
As "Maximum Step" and "Initial Step" I'm using the same value as for "Step Size".
But it does not help...
Does anybody have any advice?
Thanks in advance
Hello Norbert Bartscher
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.