Convergence problem in very low velocity

Please login with a confirmed email address before reporting spam

HI, I am using Euler euler method to simulate multiphase flow in 2D domain. When my inlet velocity is 0.001 m/s the solver is showing the below error (attached). I have used "automatic highly non-linear (Newton)" method as non-linear solver for uc,ud,and p. But whenever im using slightly higher velocity ( say 0.002 m/s) it is converging.

Is it the problem with velocity ?



3 Replies Last Post Feb 29, 2024, 12:26 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 months ago Feb 15, 2024, 8:56 a.m. EST
Updated: 2 months ago Feb 15, 2024, 8:56 a.m. EST

Hello Lakshmi,

The file you attached seems to be blank.

Jeff

-------------------
Jeff Hiller
Hello Lakshmi, The file you attached seems to be blank. Jeff

Please login with a confirmed email address before reporting spam

Posted: 2 months ago Feb 16, 2024, 1:21 a.m. EST
Updated: 2 months ago Feb 16, 2024, 1:20 a.m. EST

hi, sorry, some errror occured .I am uploading the document again. Kindly check

hi, sorry, some errror occured .I am uploading the document again. Kindly check


Please login with a confirmed email address before reporting spam

Posted: 2 months ago Feb 29, 2024, 12:26 a.m. EST
Updated: 2 months ago Feb 29, 2024, 12:26 a.m. EST

Hi, iam still facing with the same issues with low velocity, Can someone help?

Hi, iam still facing with the same issues with low velocity, Can someone help?

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.