Application ID: 177
The level set method is well suited for problems with moving boundaries in which the geometry’s topology changes with time. A bubble of oil that travels up through water and finally merges with oil at the top causes this kind of topology change. For problems where the topology is unchanged as a function of time, as in free surface movement in a tank (no splashing) and impeller stirring, it is also possible to use the ALE (arbitrary Lagrangian-Eulerian) method.
In this model, three different regions exist initially: the oil bubble, the oil at the top of the container, and the water surrounding the bubble. This example shows you how to use the Laminar Two Phase Flow interface.
This model example illustrates applications of this type that would nominally be built using the following products:CFD Module
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® and
- either the CFD Module, or Heat Transfer Module and
- either the CFD Module, or Microfluidics Module
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabela de Especificações and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.