Stress Analysis of a Roller Chain Sprocket Assembly
Application ID: 78171
Chain drives are used for transmitting power from one shaft to another, located at some distance. This example demonstrates how to model a chain sprocket assembly in 3D. The geometry consists of a roller chain wrapped around two sprockets. All components are assumed to be elastic. The system dynamics is initiated by an angular velocity prescribed at one of the sprockets. The motion is transmitted via chain links to the second sprocket which is subjected to an external, counteracting torque.
The chain sprocket assembly geometry is created using built-in geometry parts. The Chain Drive node in the Multibody Dynamics interface is used for setting up the entire model. A transient analysis is performed to understand the load path, the contact forces and the stress distribution in various components of the assembly.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabela de Especificações and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.