A Galeria de Aplicações possui tutorias sobre o COMSOL Multiphysics® e aplicativos de demonstração pertinentes às áreas de elétrica, mecânica estrutural, acústica, escoamento e química. Você pode usar esses exemplos como um ponto de partida para o seu próprio trabalho de simulação baixando o modelo do tutorial ou o aplicativo e suas instruções. Use a função "Busca Rápida" para encontrar modelos da sua área de interesse. Para baixar os arquivos MPH, faça o login, ou se cadastre, no COMSOL Access usando uma licença válida do COMSOL, para poder baixar os arquivos MPH. Note que muitos dos exemplos disponibilizados aqui também podem ser acessados através da Application Libraries que faz parte do software COMSOL Multiphysics® e está disponível a partir do menu File.


Journal Bearing with Cavitation

A journal bearing is composed of an outer cylinder (bearing) wrapped around an inner rotating journal (shaft), with a lubricant separating the two. Under certain operating conditions, cavitation can occur between the bearing and the journal, leading to component damage and failure. Knowing the rate of cavitation is helpful when determining the maximum applied load. Cavitation occurs when the ...

Setting up Periodic Heat Loads for Simulation

This example exemplifies how to model applications subjected to periodic heat loads. A more detailed description of the phenomenon, and the modeling process, can be seen in the blog post "[Modeling a Periodic Heat Load](https://www.comsol.com/blogs/modeling-a-periodic-heat-load/)".

Slip Flow Benchmark

This model is a benchmark model for the Slip Flow interface. It is based on both analytic and numeric calculations. Air at atmospheric pressure flows through a conducting micro-channel connecting two reservoirs maintained at different temperatures. A flow between the two reservoirs develops as a result of thermal creep along the channel wall, which in turn produces a pressure gradient. At steady ...

Linear Magnetic Gear

In this model, a linear magnetic gear system with a gear ratio of 11:4 is modeled. The liner magnetic gear is assumed to be infinitely long with the modular structure that is repeating on either side. Only a single modular section is modeled by using the customized linear periodic boundary condition. Both the low speed and the high speed armatures (rotors) consist of permanent magnets and back ...

Thermal Bridges in Building Construction - 3D Structure Between Two Floors

This model studies the heat conduction in a building structure separating two floors from the external environment. Four materials with distinct thermal conductivities k compose the structure. The exterior and interior boundaries are facing environments respectively at 0°C and 20°C. The lowest temperatures on internal surfaces and the heat fluxes through each surface is compared with published ...

Cycle Counting in Fatigue Analysis - Benchmark

A benchmark model of the Rainflow counting algorithm compares results between ASTM and COMSOL fatigue module using a flat tensile test specimen. An extension is made for the cumulative damage calculation following the Palmgren-Miner model and results are compared with analytical expressions.

Atmospheric Corrosion

This model simulates atmospheric galvanic corrosion of an aluminum alloy in contact with steel. The electrolyte film thickness depends on the relative humidity of the surrounding air and the salt load density of NaCl crystals on the metal surface. Empirical expressions for the oxygen diffusivity and solubility are also included in the model in order to derive an expression for the limiting ...

Galvanic Corrosion of a Magnesium Alloy in Contact with Steel

Magnesium alloys are attractive alternatives as lightweight materials in various fields of engineering. Magnesium is however relatively non-noble and may suffer considerable galvanic corrosion when being used in conjunction with other metals, for instance when mounting an Mg alloy component using steel fasteners. This model example simulates a galvanic corrosion couple consisting of a magnesium ...

Thermal Bridges in Building Construction - 2D Composite Structure

This example studies heat transfer in a composite two-dimensional structure. Four materials with distinct thermal conductivities k compose the structure. The top and bottom boundaries are facing environments respectively at 0°C and 20°C. The temperature distribution and the heat flux through the structure are compared with published data. This example corresponds to the case 2 described in ...

Split and Recombine Mixer Benchmark

This example models a split and recombine mixer channel in which a tracer fluid is introduced and mixed by multi-lamination. Diffusion is removed from the model using an extremely low diffusion coefficient so that any numerical diffusion can be studied in the lamination interfaces. The results compare well with Glatzel et al (Ref 1.) in both the lamination patterns and total pressure drop ...