Transient Electromagnetic-Thermal FE-Model of a SPICE-Coupled Transformer Including Eddy Currents with COMSOL Multiphysics 4.2
H. Neubert, R. Disselnkötter, and T. Bödrich
Technische Universität Dresden, Institute of Electromechanical and Electronic Design, Dresden, Germany
ABB AG, Forschungszentrum Deutschland, Ladenburg, Germany
Current transformers are used to measure currents in power grid systems. They are characterized by strong interactions between external electrical sources and loads respectively and the magnetic subsystem. Self-heating due to losses has to be considered because of the temperature-dependent material behaviour. The paper presents a transient 3D FEA transformer model which includes a H(|B|) ...
A.Buchau, and W. M. Rucker
Institut für Theorie der Elektrotechnik
The simulation software COMSOL Multiphysics is applied to the numerical com-putation of the magnetic fields of a three-phase transformer. A three-dimensional model of the geometrical configuration is created with the help of the CAD tools of COMSOL Multiphysics. There, all dimensions of the transformer are defined by parameters. The creation of an optimal finite element mesh is improved by some ...
F. Frezza, P. Nocito, and E. Stoja
Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Rome, Italy
MISE, Communication Department, ISCOM, Rome, Italy
We investigate and compare the characteristics of the fundamental guided mode sustained by a subwavelength plasmonic slot waveguide for three types of metals: gold, silver and aluminium. This is done in terms of mode effective index, propagation length, confinement and, as the mode under study is quasi-TEM, we also develop a transmission line model that can be useful in the design of optical ...
I. Quintana, Z. Azpilgain, D. Pardo, and I. Hurtado
Mechanical and Industrial Production Department, Faculty of Engineering, Mondragon Unibertsitatea, Loramendi 4, Mondragon 20500 Gipuzkoa, Spain
Department of Applied Mathematics, Statistics, and Operational Research, University of the Basque Country (UPV/EHU), Leioa, Spain, and IKERBASQUE (Basque Foundation for Sciences), Bilbao, Spain
This paper describes a numerical solution method for the simulation of a cold crucible induction melting (CCIM) process involving the coupling of electromagnetic, temperature and turbulent velocity fields. During the CCIM process, the metal charge is contained on a water cooled segmented copper crucible, and the energy necessary to heat, melt, and overheat the charge is generated by an ...
The safety of large civil structures is often evaluated by means of numerical models based on the Finite Element Method. In this frame, the choice of a constitutive law able to represent the complex mechanical behaviour of concrete is a key point. This paper deals with a detail description of all the steps needed to implement the Microplane Model in COMSOL; the formulation is based on the ...
S. F. Madsen, and C. Falkenstrøm Mieritz
The present paper presents numerical calculations of the magnetic fields and the current distribution within a wind turbine nacelle. The results are used by control system engineers designing panels and cables, who must ensure that the immunity of the equipment complies with the environment within the turbine. Since the release of the International standard concerning lightning protection of ...
M. Herlitschke, M. Blasl, and F. Costache
Fraunhofer Institute for Photonic Microsystems
3D FEM simulation of millimeter-scale, complex electro-optically induced waveguide based devices demands the use of grids with more than several million nodes. Hence the simulation could take substantial time and require large amounts of available memory. This paper presents a computation algorithm based on the conversion of an initial 3D waveguide structure into an analogous 2D structure, ...
L. Spicci, and M. Cati
The present paper describes the development of a full FEM model for linear array high performance 5MHz ultrasound imaging transducer. As a preliminary design, a mono dimensional electro-acoustical KLM model was realized, then the complete FEM was developed and optimized. The optimized transducer was manufactured, so that agreement between transducer measured performances and simulation ...
Electrochemical etching of silicon (anodization) is a process that can be used for etching of forms of nearly arbitrary shapes. The difficulty of applying the process for mass production is in the many parameters influencing the process, such as electrolyte concentration and temperature, silicon substrate doping and type, and so on. COMSOL as an FEM simulation tool is very suitable for ...
Design and Development, via Prototype Testing and Multiphysics Modelling, of a Thermoelectric Generator (TEG) for Integration in Autonomous Gas Heaters
M. P. Codecasa, C. Fanciulli, R. Gaddi, F. Gomez Paz, and F. Passaretti
National Research Council of Italy - IENI Institute, Lecco, Italy
Italkero S.r.l., Modena, Italy
Studio di design Francisco Gomez Paz, Milano, Italy
An autonomous gas-heater for outdoor environments was selected as a test-case for cogeneration in gas-heaters and stoves, permitting installation and operation without need of an electrical network connection. A thermoelectric generator (TEG) was designed, converting part of produced heat into electrical power for auxiliaries (ventilation) or ancillary functions (illumination). Design approach, ...