Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Modeling the Effect of Discrete Distributions of Platinum Particles in the PEM Fuel Cell Catalyst Layer

C.F. Cetinbas[1], A.K. Prasad[2], S.G. Advani[1]
[1]Center for Fuel Cell Research, Department of Mechanical Engineering, University of Delaware, Newark, DE, USA
[2]University of Delaware, Newark, DE, USA

In this study, the basic catalyst layer (CL) structure, consisting of carbon-supported Pt particles (C|Pt) and an ionomer binder, is investigated numerically by using COMSOL. The significance of modeling discrete Pt particles on the carbon support is highlighted by comparing the cell performance results to the case in which the Pt is assumed to be distributed uniformly over the carbon support as ...

Electrical and Thermal Modeling of a Molten Salt Electro-Refiner

A. Oury [1],
[1] SIMTEC, Grenoble, France

Numerical simulation can be advantageously employed to predict the main cell features (e.g., the reaction rate distribution on the electrodes, the cell voltage, or the electrolyte temperature) in order to optimize the design and operational conditions of the process. In this poster, we describe two complementary computational approaches applied to a molten salt electro-refiner for ...

Heat Generation Breakdown of Lithium-ion Batteries

WeiDong Fu [1], DongYou Wang [1], ZhiJun Qiu [1]
[1] Contemporary Amperex Technology Co., Limited, Ningde, China

The thermal behavior of lithium ion batteries could be investigated by efficient simulation method [1,2]. Here, we developed an electrochemical-lumped thermal analytical model to analyze the thermal response and heat breakdown of a pouch LiNi1/3Co1/3Mn1/3O2 battery (3Ah) under fast-discharging conditions at 7C(environment temperature:20℃). The key parameters of the proposed model (such as ...

Numerical and Experimental Study of Flow, Heat Transfer and Concentration in a Scaled-up Fuel Cell Anode Channel Model

J. C. Torchia-Nüñez[1], and J.G. Cervantes-de-Gortari[1]

[1]Department of Thermal Engineering, National University of Mexico, UNAM, Mexico City, Mexico

Flow, concentration and temperature fields are studied with numerical and experimental methods inside a scaled-up fuel cell anode channel model. The low aspect ratio channel has a porous medium as the inferior wall where a mixing of different pH solutions occurs. Chromatic change of phenolphthalein is used to visualize concentration field and Particle Image Velocimetry (PIV) is used to visualize ...

Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments

F. Daouda[1], J. Hamelin[1], P. Benard[1], S. Kumar Natarajan [1]
[1]Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada

We present a novel multi-layered electrode fabrication technique for polymer electrolyte membrane fuel cells (PEMFCs). This method consists of alternate layers of Pt deposition (0.05 mg/cm²) by sputtering on the painted multi-walled carbon-Nafion layer (CNL) with larger concentration of catalyst particles closer to the membrane. Parametric models were developed and validated by experimental ...

Numerical Modeling of a Microtubular Solid Oxide Fuel Cell Using COMSOL Multiphysics®

P. Pianko-Oprych[1], E. Kasilova[1], Z. Jaworski[1]
[1]West Pomeranian University of Technology, Faculty of Chemical Technology and Engineering, Szczecin, Poland

Micro-tubular Solid Oxide Fuel Cells (mSOFC) are attracting more and more interest as new generation of energy conversion devices. Although commercial applications still suffer from high costs, there is a need for further improvement of the cell performance, durability and start-up. To resolve those challenges, knowledge of the distributions of species concentration, temperature and current ...

Mathematical Formulation of a PEM Fuel Cell Model

E. Robalinho [1], E. F. Cunha [2], M. Linardi [2], E. I. Santiago [2],
[1] Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN, São Paulo, SP, Brazil; and Instituto Federal do Rio Grande do Sul - IFRS, Porto Alegre, RS, Brazil
[2] Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN, São Paulo, SP, Brazil

The idea of a friendly implementation of a mathematical formulation using specialist software was performed with the support of COMSOL Multiphysics® software with Chemical Reaction Engineering and Batteries & Fuel Cell Modules. The real problem of a Proton Exchange Membrane – PEM fuel cell modeling involves different scales, multiple variables and processes, coupling of solvers and experimental ...

Electrochemical Characterization of the Microband Graphite Electrodes

A. V. Volkov [1], A. N. Sekretaryova [2], I. V. Zozoulenko [1], A. P. F. Turner [2], M. Yu. Vagin [2], M. Eriksson [2]
[1] Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, Sweden
[2] Department of Physics, Chemistry and Biology, Linköping University, Linköping, Sweden

The microband design of microelectrodes is a cost-effective and easily-fabricated compromise combining convergent mass transport, due to microscale width as a critical dimension, and high output currents due to the macroscopic length. Among the various techniques available for microband electrode fabrication, screen-printing stands out as an inexpensive approach. The application of cross cutting ...

Multiphysics Simulation of an Anode-supported Micro-tubular Solid Oxide Fuel Cell (SOFC)

G. Ganzer, W. Beckert, T. Pfeifer, and A. Michaelis
Fraunhofer IKTS
Dresden, Germany

The high thermal stability and fast start-up behavior make micro-tubular solid oxide fuel cells (SOFCs) a promising alternative for small-scale, mobile power devices in the range of some Watts. To understand the transport phenomena inside a single micro-tubular SOFC, a 2-D, axi-symmetric, non-isothermal model, performed in COMSOL Multiphysics® 4.2, has been developed. Due to long current path ...

Numerical Study of Microfluidic Fuel Cell Performance

A. E. Khabbazi[1], A.J. Richards[1], and M. Hoorfar[1]
[1]School of Engineering, UBC Okanagan, Kelowna, BC Canada, Canada

Using COMSOL Multiphysics 3.5, a numerical model has been developed to determine the effect of the channel geometry and electrode configuration on cell performance based on polarization curves. The Butler-Volmer equation was implemented to determine the reaction rates at the electrodes. The Conductive Media DC module is used to model the electric fields within the fuel cell.