Veja como a simulação multifísica é usada em pesquisa e desenvolvimento


Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Veja a coleção da COMSOL Conference 2018

Bioscience and Bioengineeringx

COMSOL Thermal Model for a Heated Neural Micro-Probe

M. Christian[1], S. Firebaugh[1], A. Smith[1]
[1]United States Naval Academy, Annapolis, MD, USA

This project utilizes the heat transfer module of the COMSOL Multiphysics environment to model the effects that an ohmic heating probe will have on neural tissue. The model quantifies the thermal impact of active components embedded on a neural micro probe by solving the Penne’s bioheat ... Saiba Mais

Heat and Mass Transfer in Convective Drying Processes

C. Gavrila[1], A. Ghiaus[1], and I. Gruia[2]
[1]Technical University of Civil Engineering Bucharest, Faculty of Building Services, Bucharest, Romania
[2]University of Bucharest, Faculty of Physics, Bucharest, Romania

A dynamic mathematical model, based on physical and transport properties and mass and energy balances, was developed for the simulation of unsteady convective drying of agricultural products (fruits and vegetables) in static bed conditions. The model utilizes water sorption isotherm ... Saiba Mais

Models for Simulation Based Selection of 3D Multilayered Graphene Biosensors

E. Lacatus [1], G. C. Alecu [1], A. Tudor [1],
[1] Politehnica University of Bucharest, București, Romania

At the forefront of a new generation of sensors graphene and graphene composite materials are intensively studied for medical and biosensing applications. The outstanding electrical, mechanical and quantum properties of graphene make them a promising material solution to overlap the ... Saiba Mais

Coupled PDEs with Initial Solution from Data in COMSOL Multiphysics®

M. K. Gobbert[1], X. Huang[1], S. Khuvis[1], S. Askarian[1], B. E. Peercy[1]
[1]University of Maryland - Baltimore County, Baltimore, MD, USA

This paper presents information on techniques needed in COMSOL Multiphysics® to enable computational studies of coupled systems of PDEs for time-dependent non-linear problems. Furthermore, we demonstrate how to use data files as input for initial conditions. To illustrate the techniques, ... Saiba Mais

Simulating Organogenesis in COMSOL Multiphysics®: Parameter Optimization for PDE-based Models

D. Iber[1], D. Menshykau[2], P. Germann[2], L. Lermuzeaux[2,3]
[1]D-BSSE, ETH Zurich, Switzerland, SIB, Basel, Switzerland
[2]D-BSSE, ETH Zurich, Basel, Switzerland
[3]Department of Bioengineering, University of Nice-Sophia Antipolis, Nice, France

Morphogenesis is a tightly regulated process that has been studied for decades. Previously we developed data-based mechanistic models for a range of developmental processes with a view to integrate the available knowledge and to better understand the underlying regulatory logic. In our ... Saiba Mais

A Non-Newtonian Model for Blood Flow behind a Flow Diverting Stent

G. Mach [1], C. Sherif [2], U. Windberger [3], A. Gruber [3],
[1] Vienna University of Technology, Cerebrovascular Research Group Vienna, Vienna, Austria
[2] Hospital Rudolfstiftung, Cerebrovascular Research Group Vienna, Vienna, Austria
[3] Medical University Vienna, Cerebrovascular Research Group Vienna, Vienna, Austria

Usually, when calculating the blood flow in cerebral arteries and intracranial aneurysms, blood is modeled as a Newtonian fluid, neglecting its shear-thinning behavior. Since flow diverting devices slow down the blood flow in the aneurysm sack, the accuracy of this assumption had to be ... Saiba Mais

A Practical Method to Model Complex Three-Dimensional Geometries with Non-Uniform Material Properties Using Image-based Design and COMSOL Multiphysics®

J. Cepeda[1], S. Birla[2], J. Subbiah[2], H. Thippareddi[1]
[1]Department of Food Science & Technology, University of Nebraska, Lincoln, NE, USA
[2]Department of Biological Systems Engineering, University of Nebraska, Lincoln, NE, USA

Geometries with heterogeneous material properties are typically defined as a set of multiple parts, each part representing a different material. However, assembling or defining the individual parts of complex geometries can be difficult. A practical method based on image-based mesh ... Saiba Mais

COMSOL Multiphysics-Based Exploratory Insulin Secretion Model for Isolated Pancreatic Islets

P. Buchwald
University of Miami, Miami, FL, USA

Insulin released by the beta-cells of pancreatic islets is the main regulator of glucose homeostasis, hence, insulin secretion models are of considerable interest for many possible applications. Building on our previous oxygen consumption and cell viability model for avascular islets of ... Saiba Mais

Multiphysics Modeling of Swelling Gels

A. Lucantonio[1], P. Nardinocchi[1], L. Teresi[2]
[1]Università degli Studi La Sapienza, Roma, Italy
[2]LaMS - Modelling & Simulation Lab, Università degli Studi Roma Tre, Roma, Italy

Polymer gels belong to the realm of soft active materials as they are capable of responding to a non-mechanical stimulus – the permeation of a solvent – with a mechanical action – a volume change, thanks to the coupling between different physics. This mechanism of coupling can be ... Saiba Mais

Analysis Of Particle Trajectories For Magnetic Drug Targeting

A. Heidsieck, and B. Gleich
Zentralinstitut für Medizintechnik, TU München, München, Germany

The technique of magnetic drug targeting binds genetic material or drugs to superparamagnetic nanoparticles and accumulates them via an external magnetic field in a target region. However, it is still a challenge for this approach to succeed in areas with high flow rates, like the aorta ... Saiba Mais

First
Previous
1–10 of 417