Veja como a simulação multifísica é usada em pesquisa e desenvolvimento


Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Veja a coleção da COMSOL Conference 2018

Geophysics and Geomechanicsx

Impact Assessment of Hydrologic and Operational Factors on the Efficiency of Managed Aquifer Recharge Scheme

M.A. Rahman[1], P. Oberdorfer[1], Y. Jin[1], M. Pervin[1], E. Holzbecher[1]
[1]Department of Applied Geology, Geoscience Center, University of Göttingen, Göttingen, Lower Saxony, Germany

Due to increased demands on groundwater accompanied by increased drawdowns (ca. 2-3 meters/year), technologies that use alternative water resources have been suggested for Dhaka City, Bangladesh. Preliminary studies show that managed aquifer recharge (MAR) would help in optimal use of ... Saiba Mais

3D Simulations of an Injection Test Done Into an Unsaturated Porous and Fractured Limestone

A. Thoraval[1], Y. Guglielmi[2], F. Cappa[3]
[1]INERIS, Nancy, France
[2]CEREGE, Aix-en-Provence, France
[3]GEOAZUR, Valbonne, France

We have developed a numerical model to represent the effect of injection test in unsaturated porous and fractured rock mass. The test was conducted at the LSBB (Laboratoire Souterrain à Bas Bruit) site close to Rustrel, Vaucluse, France in the field of the French ANR project called “HPPP ... Saiba Mais

A Prediction of Energy Piles’ Long-Term Operation Using a Coupled Thermo-Hydro-Geomechanical Model

T. Vu [1], L. Medina [1], D. de la Cruz [1], J. Ramirez [1], B. Xu [1]
[1] University of Texas - Rio Grande Valley, Edinburg, TX, USA

An energy pile harvests geothermal energy to heat and cool a building by integrating ground heat exchanger (GHX) pipes into the building’s deep foundation, and extracts heat from the ground in the winter to heat buildings and injects heat into the ground during the summer. In areas with ... Saiba Mais

Magnetotelluric Response Distortion Over Rugged Topography

D. Rizzello[1], P. Canepa[1], E. Armadillo[1]
[1]DISTAV - University of Genova, Genova, Italy

Topographic effects on magnetotelluric responses may be severe on rugged terrains. Finite elements simulation is a valuable tool to quantify this effect, due to its capability to match real morphologies. To do the estimate of the distortion, the AC/DC Module of COMSOL has been employed, ... Saiba Mais

微波加热煤岩裂隙变形的电-热-固耦合模型

管伟明 [1], 聂欣 [1],
[1] 新疆大学,乌鲁木齐,新疆,中国

为研究不同加热方式下煤岩内部裂隙在热力耦合作用下的变形特征,建立了微波和常规加热两种数值模型,考查了不同温度场分布特征下裂隙周边应力应变场的变化过程。研究结果表明:微波加热,温度场分布具有内高外低的特征,此时裂隙周边分布的应力多为压应力,且数值较大,裂隙边界位移表现为向内收缩;常规加热,温度场分布具有外高内低的特性,此时裂隙周边分布应力多为拉应力,但量值较低,裂隙边界位移表现为向外扩张;热源越靠近裂隙压应力越明显,反之拉应力明显。 Saiba Mais

Finite Element Solution of Nonlinear Transient Rock Damage with Application in Geomechanics of Oil and Gas Reservoirs

S. Enayatpour[1], T. Patzek[1]
[1]The University of Texas at Austin, Austin, TX, USA

The increasing energy demand calls for advances in technology which translate into more accurate and complex simulations of physical problems. Understanding the rock damage is essential to understanding the geomechanics of hydrocarbon reservoirs. The fragile microstructure of some ... Saiba Mais

COMSOL Modeling of a Submarine Geothermal Chimney

M. Suárez [1], and F. Samaniego [2]
[1]Faculty of Sciences, Michoacán University (UMSNH), Morelia, Michoacan, Mexico
[2]Faculty of Engineering Postgrade Studies Division, National University of Mexico (UNAM), Mexico City, Mexico

New geothermal energy sources hold promise for the future. Deep submarine geothermal energy related to hydrothermal vents is emerging in many places along the oceanic spreading centers. Shallow submarine geothermal systems are found near to continental platforms. We present the initial ... Saiba Mais

Modeling of the Heat Transfer Between a CO2 Sequestration Well and the Surrounding Geological Formation

B. Sponagle[1], M. Amadu[2], D. Groulx[1], and M. Pegg[2]
[1]Mechanical Engineering, Dalhousie University, Halifax, NS, Canada
[2]Process Engineering and Applied Science, Dalhousie University, Halifax, NS, Canada

In a carbon sequestration system CO2 would be pumped down a well and into a reservoir at supercritical temperatures and pressures. An important consideration is the long term stability of the reservoir. The goal of these simulations is to thermally model the injection well and ... Saiba Mais

3D Modeling of Fracture Flow in Core Samples Using ?-CT Data

S. Hoyer[1], U. Exner[2], M. Voorn[1], A. Rath[3]
[1]Department of Geodynamics and Sedimentology, University of Vienna, Austria
[2]Museum of Natural History, Vienna, Austria
[3]OMV ESG-D Production Geology, Vienna, Austria

Knowledge on flow behavior in fractured reservoir rocks is of great interest in petroleum engineering as well as for geothermal assets. Due to the big difference of magnitude (fracture aperture: ~?m, lateral extension of reservoirs ~km), modeling of discrete fracture flow is not ... Saiba Mais

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media new

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... Saiba Mais