Veja como a simulação multifísica é usada em pesquisa e desenvolvimento

Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Veja a coleção da COMSOL Conference 2019

Multiphysicsx

Strong Localization and Rapid Time Scales of Superheating in Solid-State Nanopores novo

E. Levine[1], G. Nagashima[1], D. Hoogerheide[1], M. Burns[2], J. Golovchenko[1]
[1]Harvard University, Cambridge, MA, USA
[2]Rowland Institute at Harvard University, Cambridge, MA, USA

Extreme localized superheating and homogeneous vapor bubble nucleation have recently been demonstrated in a single nanopore in thin, solid state membranes [1]. Aqueous electrolytic solution present within the pore is superheated to well above its boiling point by Joule heating from ionic ... Saiba Mais

Hydrophone Acoustic Receiver Modeling: Turbulent Flow Modeling and Acoustic Analysis novo

D. Groulx[1], A. Bharath[1], S. Campbell[1]
[1]Department of Mechanical Engineering, Dalhousie University, Halifax, NS, Canada

The field of underwater acoustics research is constantly growing with the ongoing improvement of acoustic measuring techniques. An acoustic hydrophone receiver is a passive listening device which is widely used in biological research and sonar technology. The hydrophone however suffers ... Saiba Mais

Thermal Modeling in a Historical Building - Improving Thermal Comfort Through the Siting of a Passive Mass of Phase Change Material novo

D. Groulx[1], F. Herbinger[1], L. Desgrosseilliers[1]
[1]Mechanical Engineering, Dalhousie University, Halifax, NS, Canada

A model of an office room was created in the COMSOL Multiphysics® software to simulate heat transfer and study the impact of siting a mass of phase change material (PCM) in a room to increase thermal comfort. This study determined that incorporating the selected PCM, butyl stearate, in ... Saiba Mais

Estimation of Hydraulic Conductivity for a Heterogeneous Unsaturated Soil Using Electrical Resistivity and Level-Set Methods novo

T. K. Chou[1], M. Chouteau[1], J. S. Dubé[2]
[1]École Polytechnique de Montréal, Montréal, QC, Canada
[2]École de Technologie Supérieure, Montréal, QC, Canada

The estimation of the soil saturated hydraulic conductivity (Ks) is crucial in understanding water flow and transport of contaminants. There are many hydrological techniques available in determining this parameter (constant head method, in-situ soil analysis, etc...). While these ... Saiba Mais

Stochastic Diffusion of Calcium Ions Through a Nanopore in the Cell Membrane Created by Electroporation novo

O. Henao[1], V. Gómez[1], I. De La Pava[1], J. Sánchez [1]
[1]Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia

We simulated the diffusion of calcium ions through a nanopore created in the cell membrane by electroporation, in presence and absence of the external electric field responsible of the membrane permeabilization. First we solved the set of coupled differential equations that describe the ... Saiba Mais

Simulation of Normal and Cancerous T-cell Membrane Electroporation novo

O. Henao[1], V. Gómez[1], I. De la Pava[1], J. Sánchez[1]
[1]Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia

Electroporation is an increase of the cell membrane permeability due to the formation of aqueous pores in it when the cell is under the influence of an intense electric field [1][2]. The formation of such pores in the membrane can be used to enhance the uptake of chemotherapeutic drugs ... Saiba Mais

Geomagnetic Modeling with COMSOL Multiphysics® Software novo

G. Ha[1], S. S. Kim[1], J. H. Kim[1]
[1]Chungnam National University, Daejeon, Korea

Here we aim to advance geomagnetic modeling approaches using COMSOL Multiphysics® software and improve the degree of detail that can be obtained from the measured magnetic field. First, we carried out benchmark tests by comparing the computed results using the widely used analytic ... Saiba Mais

Fluid Leakage Across a Pressure Seal novo

R. P. Ruby[1], G. Kulkarni[2], U. Kanade[1]
[1]Noumenon Multiphysics Pvt. Ltd., Pune, Maharashtra, India
[2]Oneirix Engineering Laboratories Pvt. Ltd., Pune, Maharashtra, India

Seals or gaskets that are compressed between walls of a container are important to many industrial applications. In this paper we present a fluid flow model for predicting the sealing performance of such seals. A computational study using COMSOL Multiphysics® software suggests very ... Saiba Mais

Heat Conduction in Porous Absorption Layers for Thermography Applications novo

L. Helmich[1], A. Huetten[1]
[1]Bielefeld University, Bielefeld, Germany

Thermography measurements on metallic thin films are challenging due to reflections from the environment. We present a thin "gold black" absorption layer to deal with this issue. A multiphysics model is introduced to correct the experimentally obtained data for undesirable heat transfer ... Saiba Mais

3D Multiphysics Analyses to Support Low Enriched Uranium (LEU) Conversion of HFIR novo

P. K. Jain[1], J. D. Freels[1]
[1]Oak Ridge National Laboratory, Oak Ridge, TN, USA

Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium (LEU) fuel are ongoing at Oak Ridge National Laboratory as part of an effort sponsored by the U.S. Department of Energy’s Global Threat ... Saiba Mais