B. Mizaikoff, X. Wang, and S.-S. Kim
Institut für Analytische und Bioanalytische Chemie
Evanescent-wave optical waveguide is widely used as sensing platform for chemical/biological sensor applications. Our research group contributed to on-chip IR sensor technology and made recent progress in miniaturizing such devices utilizing quantum cascade lasers (QCL) in combination with planar GaAs/Al0.2Ga0.8As waveguides. Furthermore progress is reported toward microfabricated Mid-infrared ...
H. van Halewijn
Eindhoven, The Netherlands
For the educational program of Fluid Dynamics at the Fontys Hogeshool of Applied Physics, a wind tunnel was developed for tests of flow profiles of objects, such as a ball, cube or plate. Students are expected to measure the air resistance of a variety of objects, and verify the measurements with the turbulent CFD module of COMSOL. The measurements and the COMSOL simulations match nicely, and ...
M. Fält, and R. Zevenhoven
Thermal and Flow Engineering Laboratory, Department of Chemical Engineering
Åbo Akademi University
Air-conditioning produced by traditional vapor compression cycle is an energy demanding operation. By using passive cooling methods is it possible to avoid, or at least reduce, the need for vapor compression cooling. A passive radiative cooling method could be a three windowed skylight, filled with a greenhouse gas. Earlier modeling of such a skylight has shown promising results, and work has ...
M. Souley, and A. Thoraval
Ecole des Mines
Parc de Saurupt, France
The long-term behaviour of the underground excavations is a social and economic challenge particularly in the contexts of post-mining or radioactive waste storage. Numerical modelings are currently used to understand and forecast the complex behaviour of rock mass around the underground cavities. In order to accurately perform these multiphysics modelings at high space and time scales, it is ...
H. Zhou, L. Jiang, and S. Yao
The Hong Kong University of Science and Technology,
Rapid mixing is of essential importance in many microfluidic applications such as chemical reactions, drug delivery, sequencing or synthesis of nucleic acids, protein crystallization, etc. However, it is difficult to mix fluids in microchannels since flows in these channels are generally laminar and molecular diffusion is usually insufficient to mix fluids. Using a combination of turns and ...
S.V. De Guido, G.S. Masi, P. Vladimirovich Miodushevsky, L. Vasanelli
Department of Innovation Engineering, University of Salento, Lecce, Italy
Pressure sensors operating at the temperature higher that 500 °C are absent in the world market. Our goal is to develop a pressure sensor that can operate at the high temperature up to 700 °C. Our sensor will be made up of a ceramic sensible element and a metallic case. The sensible element will be a ceramic beam with a Weathstone bridge on its surface. A structural analysis on the case has been ...
Optimizing Performance of Equipment for Thermostimulation of Muscle Tissue using COMSOL Multiphysics
J. Kocbach, K. Folgerø, L. Mohn, O. Brix
Christian Michelsen Research, Bergen, Norway
Luzmon Norway, Bergen, Norway
Michelsen Medical, Bergen, Norway
The design challenge for thermostimulation equipment is to get a combination of high electric field strength and high temperature within the muscle tissue without causing pain or skin burns. In the present work, COMSOL Multiphysics is used to simulate the temperature distribution and electric field distribution within body tissue for varying body composition and varying design parameters of the ...
V. S. Nagaraja, Ramanuja H. S., Deepak K, S. L. Pinjare
Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, Karnataka, India
In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap which is achieved by using Aluminium as a sacrificial layer in between, which is etched away to create the air ...
K. PraveenKumar, P. Suresh, K. Subash, M. Alagappan, A. Gupta
PSG College of Technology, Coimbatore, Tamil Nadu, India.
In this work, we present the performance analysis of novel micro machined Piezoresistive fluid flow pressure sensor using COMSOL Multiphysics. The principle of the sensing mechanism is based on the deflection of four sensing layers embedded on a thin membrane. The fluid passes through the layer causes the deflection of the sensing layer which measures the pressure of the fluid. The following ...
W. Wang, K. Genc
University of Massachusetts, Lowell, MA, USA
Simpleware, Exeter, United Kingdom
During the past decade reverse engineering has become a common and acceptable practice utilized by many aftermarket suppliers, and even original equipment manufacturers (OEM). This presentation focuses on the applications of multiphysics software such as COMSOL and Simpleware® in reinventing the design details and manufacturing processes of an existing part in the absence of the original design ...