Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Development of an Interlinked Curriculum Component Module for Microchemical Process Systems Components Using COMSOL Multiphysics

A. Mokal, and P. Mills

Department of Chemical and Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

COMSOL Multiphysics provides a powerful numerical platform where various models for microchemical process technology components can be readily created for both education and research. This modeling tool allows chemical engineering students to focus on understanding the effects of various microchemical system component design and operational parameters versus coding and debugging of the numerical ...

Modeling Ion Motion in a Miniaturized Ion Mobility Spectrometer

S. Barth, and S. Zimmermann
Drägerwerk AG & Co. KGaA, Lübeck, Germany

Ion mobility spectrometry provides fast detection of very low concentrations of chemical substances. Simple instrumentation combined with high sensitivity and high selectivity are the advantages of this technique. One well established field of application is the detection of hazardous compounds in air, such as chemical warfare agents, explosives and pollutants. A numerical model based on finite ...

An Agglomerate Model for the Rationalisation of MCFC Cathode Degradation

B. Bozzini[1], S. Maci[1], I. Sgura[2], R. Lo Presti[3], and E. Simonetti[3]
[1]Dipartimento di Ingegneria dell’Innovazione, Università del Salento, Lecce, Italy
[2]Dipartimento di Matematica, Università del Salento, Lecce, Italy
[3]ENEA Casaccia, Dipartimento TER, Centro Ricerche Casaccia, S. Maria di Galeria, Roma, Italy

This paper describes the numerical modeling of a key material-stability issue within the realm of Molten Carbonate Fuel Cells (MCFC). The model describes the morphological and attending electrocatalytic evolution of porous NiO electrodes and is apt to predict electrochemical observables that can be recorded during Fuel Cell operation. The model has been validated with original experimental data ...

Energy Transformation Damping

G.S. Mulder[1]
[1]Leiden, The Netherlands

A model for material damping is presented in terms of internal friction and in terms of a variation of stiffness. In the latter case the idea is that the stiffness increases if elastic energy is stored and decreases if elastic energy is released. In case of a single mass spring system “stiffness” refers to the stiffness of the spring; in case of a continues object &ldquo ...

The Use of Multiphysics Modeling in the Steel Industry

Filip Van den Abeele
Simulation Expert, OCAS, Belgium

OCAS is a joint venture between ArcelorMittal and the Flemish Region. She uses COMSOL Multiphysics for the following: Enamel solidification Magnetic Pulse Forming Electromagnetic modelling of electric machines Vortex Induced Vibrations Model Identification for Orthotropic Materials and much more ---------------------------------- Keynote speaker's biography:Filip Van den Abeele has a ...

Application of System Identification Methods to Implement COMSOL Models into External Simulation Environments

A.W.M. van Schijndel[1] and M. Gontikaki[1]

[1]Eindhoven University of Technology, Eindhoven, The Netherlands

Full coupling of distributed parameter models, like COMSOL, with the lumped models often lead to very time-consuming simulation duration times. In order to improve the speed of the simulations, the idea of using system identification methods to implement the distributed parameters models of COMSOL into external simulation environments, is explored. It is concluded that the system identification ...

Coupled Hydro-Mechanical Analysis of Excavation Damaged Zones around an Underground Opening in Sedimentary Rock

H. Abdi[1], E. Evgin[1], M. Fall[1], T.S. Nguyen[2], and G. Su[2]
[1]University of Ottawa, Ottawa, ON, Canada
[2]Canadian Nuclear Safety Commission, Ottawa, ON, Canada

A large amount of research work has been carried out in many countries to determine the viability of radioactive waste disposal in deep geological repositories. It is well known that excavation can cause damage around underground openings. On the other hand, the mechanical damage can influence the stability of the opening and the flow characteristics of the rock mass. In addition, all physical ...

Large Scale Invasion Of New Species And Of Genetic Information

O. Richter, F. Suhling, and S. Moenickes
Technische Universität Braunschweig, Germany

The spatial dynamics of the invasion of new species and genetic dispersal is studied under the presumption of rising temperature by using a coherent approach of coupled partial differential equations of the reaction diffusion type. The nonlinear reaction terms model the population dynamics, genetic exchange and competition. Temperature reaction norms of reproduction rates are conferred by a two ...

Non-Equilibrium Quantum Well Populations and Optical Characteristics of III-Nitride Lasers and Light-Emitting Diodes

M. Kisin, and H. El-Ghoroury
Ostendo Technologies, Inc.
Carlsbad, CA

COMSOL-based Ostendo’s Optoelectronic Device Modeling Software (ODMS) has been updated to include effects of non-equilibrium QW populations in semiconductor light-emitting and laser diodes. III-nitride light emitters with different levels of polarity have been compared as an illustrative example of ODMS performance. Modeling proved that high intra-QW recombination rates in III-nitride light ...

Modeling Spectral Emission Phenomena in Beryllium Plasma Using COMSOL Multiphysics

C. Gavrila[1], C. P. Lungu[2], and I. Gruia[3]
[1]Technical University of Civil Engineering Bucharest, Romania
[2]National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
[3]University of Bucharest, Faculty of Physics, Bucharest, Romania

The purpose of this paper is to present a numerical modeling of plasma phenomena in beryllium emissions using COMSOL Multiphysics software. The Beryllium films were deposited on mirror polished fine grain graphite substrates using the Thermionic Vacuum Arc (TVA) technology available at NILPRP – Magurele, Romania. The developed system for thin film deposition using thermionic vacuum arc (TVA) ...