X. Wang, J. Peitzmeier , and S. Kapturowski
Oakland University, Rochester, MI, USA
Michigan Technological University, Houghton, MI, USA
The State University of New York at Buffalo, Buffalo, NY, USA
The flow channel design on bipolar plates affects proton exchange membrane (PEM) fuel cell performance by influencing reactant distribution and water removal in an operating fuel cell. The fuel cell performance can be improved by varying the type, size, or arrangement of channels. Two bio-inspired designs have been proposed by a research group at Oakland University, which results in ...
Israel Military Industry, Ramat-Hasharon, Israel
Because of its high enthalpy of combustion, aluminum has been added to energetic materials. In this paper, a two dimension thermal model is developed and assessed to describe the interrelated processes of Aluminum particle oxidation by using the software COMSOL Multiphysics. The thermal model consists of thermal radiation, forced convection and thermal conduction and oxygen diffusion. It is ...
Panasonic Boston Laboratory, Newton, MA, USA
Dr. Yosuke Mizuyama is a Lead Engineer at Panasonic Boston Laboratory. He has been working on various electronics for Panasonic Corporation in Japan for many years. His research includes incandescent/fluorescent lamp, electrostatic/pzt inkjet, MEMS and BD/DVD/CD optical drive. His current interest is electromagnetic simulation for laser and optics. He has been engaged in numerical analysis using ...
A. Regtmeier, A. Weddemann, I. Ennen, and A. Hütten
Dept. of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, Bielefeld, Germany
Dept. of Elect. Eng. and Comp. Science, Lab. for Electromagnetic and Electronic Syst., MIT, Cambridge, MA
Institute of Solid State Physics, Vienna University of Technology, Vienna, Austria
Superparamagnetic nanoparticles have a wide range of applications in modern electric devices. Recent developments have identified them as components for a new type of magnetoresistance sensor. We propose a model for the numeric evaluation of the sensor properties. Based on the solutions of the Landau-Lifshitz-Gilbert equation for a set of homogeneously magnetized spheres arranged in highly ...
Non-Equilibrium Quantum Well Populations and Optical Characteristics of III-Nitride Lasers and Light-Emitting Diodes
M. Kisin, and H. El-Ghoroury
Ostendo Technologies, Inc.
COMSOL-based Ostendo’s Optoelectronic Device Modeling Software (ODMS) has been updated to include effects of non-equilibrium QW populations in semiconductor light-emitting and laser diodes. III-nitride light emitters with different levels of polarity have been compared as an illustrative example of ODMS performance. Modeling proved that high intra-QW recombination rates in III-nitride light ...
S. Newbauer, D. Cook, and D. Pettis
Milwaukee School of Engineering
Designing a component with multiple functions, e.g. load bearing and noise attenuation, can increase the effectiveness of each component and reduce the complexity of the overall system, thereby improving system efficiency as well. Current multifunctional components include metal foam. It is posited that the cellular pores of the metal foam can be engineered and optimized for desired ...
F. Loos, and H.-D. Ließ
Universität der Bundeswehr München
The purpose of this work is to investigate the triggering behaviour of safety fuses for mobile on board supply systems. The influence of different materials and shapes of the fuses on the triggering behaviour are analyzed. Furthermore, the simulation results obtained by the use of COMSOL Multiphysics® are compared to experimentally achieved data. For the transient simulation of the heat ...
A. Egedy, T. Varga, and T. Chován
University of Pannonia
Department of Process Engineering
With detailed hydrodynamic modelling of a system the critical parameters and operation limits can be determined. In the field of fluid dynamic and reactor engineering one of the most important aspects is the practical knowledge of future engineers and technicians. In our research several different reactor constructions and impeller configurations were modelled to achieve a better ...
P. Scotton, and D. Rossi
Dipartimento di geoscienze
Università di Padova
The paper aims to clarify some aspects of the gases hydro-dynamics within the twisted conduct of heat accumulation stoves (ceramic-refractory stoves) downstream the combustion chamber. Both Comsol laminar and k-e turbulent models have been used in case of straight and curved pipes with circular, square and rectangular cross-sections, at different Reynolds numbers, in case of smooth wall (Comsol ...
S. Anyyeva, and K. Kunisch
Institute of Mathematics and Scientific Computing
Karl Franzens University
We treat a gradient constrained minimization problem which has applications in mechanics and superconductivity. A particular case of this problem is the elastoplastic torsion problem. In order to solve the problem we developed an algorithm in an infinite dimensional space framework using the concept of the generalized Newton derivative. The Desktop environment of COMSOL Multiphysics 4.1 was ...