Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.
COMSOL-News-Magazine-2017
COMSOL-News-Magazine-2017-Special-edition-acoustics
COMSOL-News-Magazine-2016

Modeling an Adsorption Process in a Shell-and-Tube-Heat-Exchanger-Type Adsorber - new

G. Salazar Duarte[1], B. Schürer[1], C. Voss[1], D. Bathen[2]
[1]Linde AG, Munich, Germany
[2]Universität Duisburg-Essen, Duisburg, Germany

Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA) are commonly used for separation/purification of gas mixtures in industrial processes. The cycle time of industrial TSA processes usually ranges from several hours to days. The reason for this long cycle time is the usage of purge gas for heating and cooling the system (direct heating), which limits the application of TSA ...

Transient CFD Investigation of a Photocatalytic Multi-tube Reactor

S. Denys [1], J. van Walsem [1], J. Roegiers [1], S. Lenaerts [1],
[1] University of Antwerp, Antwerp, Belgium

As in industrial countries, people spend most of their time indoors and the stringent heat-insulation measures in combination with deficient ventilation have a negative impact on indoor air quality, one approach for abating indoor air pollution is the integration or retrofitting of a photocatalytic oxidation or PCO reactor into continuous flow. PCO technology is very cost-effective, efficient ...

Coupling Miscible Flow and Geochemistry for Carbon Dioxide Flooding into North Sea Chalk Reservoir

B. Niu[1], W. Yan[1], A.A. Shapiro[1], and E.H. Stenby[1]

[1]Department of Chemical and Biochemical Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark

As an effective method to cope with green-house gas emission, and to enhance oil recovery, injection of carbon dioxide into oil reservoirs has obtained increasing attentions. The flooding process involves complex phase behavior among oil, brine and CO2, and geochemical reaction between CO2 and rock. COMSOL Multiphysics® was first applied to simulating two flooding processes with known ...

Approaches for Fuel Cell Stack Modeling and Simulation with COMSOL Multiphysics

C. Siegel[1,2], G. Bandlamudi[1,2], P. Beckhaus[1], and A. Heinzel[1,2]
[1]Zentrum für BrennstoffzellenTechnik (ZBT), Duisburg, Germany
[2]University of Duisburg-Essen, Duisburg, Germany

This study highlights the possibility of using COMSOL Multiphysics for solving large scale PEM fuel cell stack models in the order of several million degrees of freedom (DOF). First, different gas flow channel configurations are solved in order to highlight the fluid flow and pressure behaviour. For these models, the full 3D Navier-Stokes equations are solved. It is seen that the amount of fluid ...

Phase Field Modeling of Helium Precipitate Networks on Solid-state Interfaces

D. Yuryev[1], M. Demkowicz [1]
[1]Massachusetts Institute of Technology, Cambridge, MA, USA

We describe simulations performed in COMSOL Multiphysics® of the precipitation of helium (He) on solid-state interfaces. The non-uniform precipitation of He at certain interfaces is a result of a heterogeneous energy distribution in the interface plane: He wets high interface energy (“heliophilic”) regions but does not wet low interface energy (“heliophobic”) ones. Using a phase-field model, ...

Modeling Maillard Reaction and Thermal Transformations During Bread Baking

D. Papasidero[1], F. Manenti[1]
[1]Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Milano, Italy

One big challenge for the food industry is to predict and optimize flavors. The Maillard reaction occurs in food matrices containing carbohydrates and proteins under specific operating conditions. The presented research couples thermal and kinetic modeling to the bread baking process, an ideal field to study this complex set of reactions responsible for many bread flavors. The thermal model ...

Simulation of Manufacturing Process of Ceramic Matrix Composites

S. Yushanov, J. Crompton, and K. Koppenhoefer
ACES of Columbus, LLC, Columbus, OH, USA

Improved performance of aeroengines requires the development of new manufacturing technologies for ceramic matrix composites (CMCs). This has been simulated using COMSOL Multiphysics. Specialized simulation technologies have been developed to describe the infiltration of molten material into a ceramic perform. The physical phenomena considered in the analysis includes: unsaturated flow, ...

COMSOL application in modeling PEMFC transients

X. Li
Chinese Academy of Sciences, Dalian Institute of Chemical Physics, Beijing, China

We studied the transient characteristics of PEMFC and water transport during PEMFC start-up, concerning the following aspects: Effect of air stoichiometry change on transient behavior of PEMFC, Transient behavior of water transport during PEMFC start-up, and high temperature PEMFC modeling.

Numerical Simulations of Radionuclide Transport through Clay and Confining Units in a Geological Repository using COMSOL

J. Hansmann[1], M. L. Sentis[1], B. J. Graupner[1], A.-K. Leuz[1], C. Belardinelli[2]
[1]Swiss Federal Nuclear Safety Inspectorate (ENSI), Brugg, Switzerland
[2]Kantonsschule Solothurn, Solothurn, Switzerland

Introduction: The sectoral plan that defines the procedure and criteria of site selection for deep geological repositories for all categories of waste (high-level and low- and intermediate-level waste) in Switzerland started in 2008 and will last for about ten years. ENSI (Swiss Nuclear Safety Inspectorate) is in charge of reviewing the proposals and safety assessments for geological ...

Modeling of Asphaltenes and Oil Shale Pyrolysis - new

J. P. Mmbaga[1], F. Munoz[2], S. Dhir[1], R. Gupta[1], R. E. Hayes[1], M. Toledo[2]
[1]University of Alberta, Edmonton, AB, Canada
[2]Departamento de Ingenieria Mecanica, Universidad Tecnica Federico Santa Maria, Valparaiso, Chile

Pyrolysis is a key step in the conversion of carbonaceous materials into useful products. In this study, we investigate the pyrolysis of asphaltene and oil shale, both experimentally and numerically. COMSOL Multiphysics® software is used to model the combined effects of fluid flow in porous media, mass transfer of species, heat transfer, and reaction kinetics. Gas evolution and the porosity ...