Geometria

Design Module license checked out directly when starting 2D drawings

Número da Solução: 1280 Aplica-se a: COMSOL Multiphysics, Design Module Versões: 5.5

For users of a floating-network license for COMSOL Multiphysics that includes the Design Module, a license key for the Design Module is checked out as soon as you draw something in a 2D geometry. This is the case even ...


Error: Please close the COMSOL window in SOLIDWORKS before synchronizing the geometry

Número da Solução: 1279 Aplica-se a: LiveLink for SOLIDWORKS Versões: 5.5

When I try to synchronize the geometry between COMSOL and SOLIDWORKS, the error message Please close the COMSOL window in SOLIDWORKS before synchronizing the geometry. is displayed. This error may occur sometimes ...


The usage of Form Union and Form Assembly

Número da Solução: 1216 Versões: Todas as versões

There is an option to Form Union or Form Assembly at the end of the Geometry sequence. What does this mean and when should I switch between them? The Geometry branch within the Model Builder consists of a sequence of ...


Error: Failed to connect to Inventor

Número da Solução: 1167 Versões: Todas as versões

When I try to synchronize the geometry between COMSOL and Inventor LT, the error message Failed to connect to Inventor. Please make sure Inventor is running. is displayed. Inventor LT does not support third party ...


Using symmetries in COMSOL Multiphysics

Número da Solução: 1038 Versões: Todas as versões

How do I take advantage of the symmetries in my COMSOL model? ##Using Symmetries to Reduce Model Size By using symmetries in a model you can reduce its size by one-half or more, making this an efficient tool for ...


Error: Failed to connect to Solid Edge

Número da Solução: 1160 Aplica-se a: LiveLink for Solid Edge Versões: Todas as versões

When I try to synchronize the geometry between COMSOL and Solid Edge, the error message Failed to connect to Solid Edge. Please make sure Solid Edge is running. is displayed, and the COMSOL Multiphysics tab in Solid ...


Error: Failed to connect to Inventor

Número da Solução: 1163 Versões: Todas as versões

When I try to synchronize the geometry between COMSOL and Inventor, the error message Failed to connect to Inventor. Please make sure Inventor is running. is displayed. In addition, in the Inventor user interface, ...


Error: Failed to connect to PTC Pro/ENGINEER

Número da Solução: 1162 Versões: Todas as versões

When I try to synchronize the geometry between COMSOL and PTC Pro/ENGINEER Wildfire 4.0, the error message Failed to connect to PTC Pro/ENGINEER. Please make sure PTC Pro/ENGINEER is running. is displayed. The ...


Parameter Selection Is Not Available in the PTC Pro/ENGINEER User Interface

Número da Solução: 1159 Aplica-se a: LiveLink for PTC Pro/ENGINEER Versões: Todas as versões

The COMSOL menu and Parameter Selection are not available in the PTC Pro/ENGINEER (PTC Creo Elements/Pro) user interface, and parameter names are not synchronized to COMSOL. For parameter selection to work in PTC Pro ...


Parameter Selection Is Not Available in the PTC Creo Parametric User Interface

Número da Solução: 1158 Aplica-se a: LiveLink for PTC Creo Parametric Versões: 5.4, 5.3a, 5.3, 5.2a, 5.2, 5.1, 5.0

The COMSOL Multiphysics tab and the Parameter Selection button are not available in the PTC Creo Parametric user interface, and parameter names are not synchronized to COMSOL. For parameter selection to work in PTC ...


Primeiro
Anterior
1–10 of 13

Learning Center Resources

Learn how to use the COMSOL Multiphysics® software for modeling devices, designs, and processes. Access the Learning Center courses and articles below for modeling guidelines, step-by-step demonstrations, and exercise files.