Solving electromagnetic heating models with high-frequency loadsSolution Number: 1257 Versions: All versions
I am solving a Multiphysics problem involving electromagnetics and heat transfer. The electromagnetic fields are varying at a constant frequency, and the period is very short compared to the timespan over which the ...
Reducing the amount of solution data stored in a modelSolution Number: 1255 Versions: All versions
My models contain a lot of solution data, and I do not want my file sizes to get too large, it takes a lot of disk space. What can I do to reduce file size? Will this reduce the time it takes to solve the model? File ...
Controlling the Time Dependent solver timestepsSolution Number: 1254 Versions: All versions
I am solving a transient model and changed the stepsize in the Times: field in the Study Settings, but the solver is still taking exactly the same timesteps. It seems the timesteps that the solver is taking are not ...
Solving Wave-Type Problems with Step Changes in the LoadsSolution Number: 1244 Applies to: COMSOL Multiphysics Versions: All versions
I am solving a transient model and am expecting the solution to oscillate over time in response to step changes in the loads. How should I set up such a model? What solver changes should I make? Certain models will ...
Running parametric sweeps, batch sweeps, and cluster sweeps from the command lineSolution Number: 1250 Versions: All versions
This solution describes how to launch a parametric sweep, a batch sweep, or a cluster sweep simulation in COMSOL Multiphysics® from the command line. ## Short Summary Model methods are presented as a concept to ...
Solution number is out of rangeSolution Number: 1249 Applies to: COMSOL Multiphysics Versions: 5.3a
You compute a distributed parametric sweep on a cluster. When processing the results some values are missing or you get errors such as "The solution number is invalid" or "Solution number is out of range". This issue ...
Solving Models with Pulsed Loads in TimeSolution Number: 1245 Versions: All versions
I am solving a transient model which has loads that change instantaneously in time, but the solver appears to be missing some of these changes in the loads. How to I get the solver to correctly recognize when the load ...
Manually Setting the Scaling of VariablesSolution Number: 1240 Versions: All versions
The default behavior of the software is to assume a different scaling for each set of variables in your model. These scale factors are by default automatically determined, but sometimes may need to be manually tuned. ...
Manually setup the geometric multigrid solverSolution Number: 1213 Versions: All versions
The geometric multigrid solver accelerates the convergence of the iterative solver by solving the finite element problem on a series of meshes rather than a single one. The multigrid algorithm starts with the initial ...
Solving time dependent models with inconsistent initial valuesSolution Number: 1172 Versions: All versions
A common mistake when setting up transient models is to have initial conditions that are inconsistent with the loads and boundary conditions. This occurs most often when running transient fluid flow studies, but the ...
Browse by CategoryError Messages (63)
Structural Mechanics (3)
Fluid Dynamics (1)
ALE / Parameterized Geometry (1)
Product Information (2)
User Models (1)