Mixing of Water in a Flat Bottom Mixer
Application ID: 14597
This tutorial example simulates the flow in a flat bottom mixer containing, agitated by a pitched four blade impeller, where the fluid is water, and flow is assumed to be turbulent. The flow in the mixer is modeled using the k-ε turbulence model, and a time-dependent simulation corresponding to 30 revolutions of the impeller is performed in order to reach the operating conditions of the mixer.
When postprocessing the results, the self-similarity of the axial flow along the baffles is analyzed. In agreement with literature, the normalized velocity profiles at different axial positions are found to be self-similar indicating that the flow in this region resemble a three dimensional wall jet.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabela de Especificações and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.