Time-to-Frequency Fast Fourier Transform of a Coaxial Low-Pass Filter
Application ID: 43851
A very wide band coaxial low-pass filter is designed using a 2D axisymmetric model. To address the wide band frequency response with a fine frequency resolution, the model is built with a transient physics interface first. Then, S-parameters are calculated using a time-to-frequency Fourier transform.
To achieve a low-pass frequency response, an air-filled coaxial cable is tuned with five annular rings (irises) that are added to the outer conductor wall in this example model. The coaxial cable walls and iris parts are modeled as perfect electric conductors (PEC). The volume inside the center conductor of the coaxial cable is removed and only the conducting metal surfaces are modeled.
The computed S-parameters show a low-pass frequency response with a cut-off frequency around 24.5 GHz.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabela de Especificações and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.