Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2023 Collection

All

Bengaluru 2023

Munich 2023

Bioscience and Bioengineeringx

From Music to Non-Invasive Therapies via COMSOL Multiphysics® Models

E. Lacatus[1], G. C. Alecu[2], A. Tudor[2], M. A. Sopronyi[3]
[1]Polytechnic University of Bucharest, Bucharest, Romania
[2]Student-Polytechnic University of Bucharest, Bucharest, Romania
[3]INFLPR -National Institute for Laser Plasma and Radiation Physics, Bucharest, Romania

Vibration and music therapies are non-invasive treatments having effective results although their basics are still disputed. By the application of COMSOL Multiphysics® software for modeling and analysis, some of the nonlinear physical phenomena laying on these applications may be ... Read More

Determination of the Mechanical Properties in the Avian Middle Ear by Inverse Analysis

P. Muyshondt[1], J. Soons[1], D. de Greef[1], J. Peacock[1], J. Dirckx[1]
[1]University of Antwerp, Antwerp, Belgium

The middle ear of birds is a fascinating mechanical system, as it contains only one bony ossicle, compared to three in mammals, yet its auditory performance is not substantially worse. Its design resembles some currently used middle ear prostheses, so the understanding of its working ... Read More

Analysis to Determine Optimum Strain Gauge Locations for SENSEWHEEL

T. Suzuki[1], C. Holloway[1], S. Taylor[1]
[1]University College London, London, UK

Manual wheelchair users suffer shoulder pain and injury in the long term because of unconscious overuse. The ‘SENSEWHEEL’, which interposes three identical load cells between pushrim and rear wheel, measures the three components of pushing force Fx, Fy and Fz, and axial torque Tx ... Read More

Simulating Organogenesis in COMSOL Multiphysics®: Image-Based Modeling

D. Iber[1,3], Z. Karimaddini[1,3], E. Unal[1,2], D. Menshykau[1,3]
[1]D-BSSE, ETH Zurich, Basel, Switzerland
[2]DBM University of Basel, Basel, Switzerland
[3]Swiss Institute of Bioinformatics (SIB), Lausanne, Switzerland

Mathematical Modeling has a long history in developmental biology. Advances in experimental techniques and computational algorithms now permit the development of increasingly more realistic models of organogenesis. In particular, 3D geometries of developing organs have recently become ... Read More

血管对肿瘤的光热疗法的影响

吴淑莲 [1], 李晖 [2], 李志芳 [2],
[1] 福建师范大学，福州，中国
[2] 福建师范大学，福州，中国

引言：激光诱导间质肿瘤热疗法是一种可使生物组织局部地方凝结坏死的肿瘤疾病治疗方法，目前已经用于肝、脑等各部位的肿瘤治疗[1-2]。为了更好地进行肿瘤疾病的治疗，需要实时地对组织的温度和热损伤进行监控，而检测技术很难实现对肿瘤治疗过程的实时监测，故数值计算成为研究光热疗法的有力工具[2-6]。本模型将生物组织光传输的物理场与热传输的物理场相耦合，考虑组织光热参数随温度变化的情况，研究了肿瘤周围含有大动脉的情况时组织的温度分布随时间的变化情况，研究结果对指导临床医学肿瘤治疗有重要意义。 COMSOL Multiphysics® 的软件使用：几何模型：如图1所示 ... Read More

基于 DTI 纤维追踪和有限元力学模型的脑损伤轴突纤维损伤研究

李娜 [1], 李江红 [2]
[1] 中南大学湘雅三医院，长沙，湖南，中国
[2] 中车集团南车研究所，株洲，湖南，中国

研究头部损伤机理是对运动撞击中脑损伤进行预测的有效手段。数学模型是分析损伤实验数据、预测人员碰撞损伤程度的唯一方法，但现有的头部损伤有限元模型基于尸体实验数据，且忽略脑组织结构的各向异性。本项目旨在提出并实现一种以损伤生物力学为基础、结合磁共振扫描 DTI 的轴突走向信息的有限元力学模型。提取脑外伤前的弥散张量成像信息，实现深入到轴突水平有限元力学模型的建立，在有限元模拟中采用非线性超弹性力学模型，并植入 NSGAII 最优化方法对有限元模型的材料参数进行优化，从而提高模型的稳定性和计算精度；将计算预测结果与损伤后 DTI 的 FA 值所表现的轴突断裂情况进行验证， ... Read More

MCA 动脉瘤血流动力学分析

刘孟杰 [1], 付芳芳 [2], 李萌 [1]
[1] 郑州大学，郑州，河南，中国
[2] 郑州大学附属省人民医院，郑州，河南，中国

动脉瘤破裂是引起蛛网膜下腔出血的一种主要原因。结合 COMSOL Multiphysics® 灵活的几何建模特性以及强大的流体仿真求解能力，本文分别对两组不同大小关系的 MCA 动脉瘤理论模型进行了仿真建模分析。通过模拟分析，获得了动脉瘤球囊体长度和宽度与动脉瘤基底宽度不同比例条件下的动脉瘤速度、压力、壁面切应力（WSS）等参数的变化规律，分析了几何形态与动力学参数之间的关系。模拟结果显示：1、宽颈动脉瘤，瘤体内部旋流强度较之窄颈动脉瘤更强，中心区流速更低，更有利于形成血栓而且顶点处压力更大，更易破裂。2、增大动脉瘤宽度与基底直径的比值，顶点处 WSS 呈非线性增长 ... Read More

First

481–487 of 487

Next |

Last