LiveLink™ for Solid Edge® Updates

For users of LiveLink™ for Solid Edge®, COMSOL Multiphysics® software version 5.3a brings an updated tutorial model and extends support to new versions of certain CAD file formats. Read more about the LiveLink™ for Solid Edge® updates below.

Updated Tutorial Model: Electrical Heating in a Busbar

This tutorial now uses selections that were synchronized to the COMSOL Multiphysics® model from materials assigned to the components in the Solid Edge® assembly. After synchronization, the selections are used to assign materials on the geometry in the COMSOL Multiphysics® model more easily. A parametric sweep over two-dimensional parameters in the Solid Edge® assembly has been included to study the influence of the geometry on the physics phenomena, with a Table Surface plot included in the results to visualize this.

A screenshot of the updated Electrical Heating in a Busbar model using LiveLink™ for Solid Edge®. An assembly file is synchronized over to the COMSOL Multiphysics® software, with titanium and copper material selections automatically imported over from the Solid Edge® software. The 2D plot can help in selecting geometric parameter combinations that keep the maximum temperature in the copper components below the desired maximum value, 90 degrees Celsius in this case.
An assembly file is synchronized over to the COMSOL Multiphysics® software, with titanium and copper material selections automatically imported over from the Solid Edge® software. The 2D plot can help in selecting geometric parameter combinations that keep the maximum temperature in the copper components below the desired maximum value, 90 degrees Celsius in this case.

Updated Support for New CAD File Format Versions

The CAD file import and export functionality has been extended to support new versions for the following file formats:

Read from File

  • Parasolid®: (.xt, .xmttxt, .xb, .xmtbin) up to V30.0
  • ACIS®: (.sat, .sab, .asat, .asab) up to R25, 2018 1.0
  • AutoCAD® (.dwg, .dxf) up to 2017
  • CATIA® V5 up to 2017
  • PTC Creo Parametric™ up to 4.0

Write to File

  • Parasolid®: (.xt, xb) V30.0

You can view a complete list of supported CAD file formats in the CAD Specification Chart under the "Read from File, CAD" and "Write to File" sections.


Solid Edge and Parasolid are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. AutoCAD is a registered trademark or trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. ACIS is a registered trademark of Spatial Corporation. SOLIDWORKS is a registered trademark of Dassault Systèmes SOLIDWORKS Corp. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Creo is a trademark or registered trademark of PTC Inc. or its subsidiaries in the U.S. and in other countries. COMSOL AB and its subsidiaries and products are not affiliated with, endorsed by, sponsored by, or supported by these trademark owners.